← All articles
Henare Construction Build Planning

Before the Foundations: Boundary Checks and Building Set-Out in Northland

Checking the building position
Published 17 November 2026
5 min read
Northland & New Zealand
Published17 November 2026
Read time5 min
TopicBoundaries and set-out
RegionNorthland, NZ

Before foundation work starts, you should be able to point to where the house will sit and explain how that position was checked. On a Northland new build, that means separating the legal property boundary from the fence you can see, then making sure the building set-out matches the final approved drawings. A tidy line of pegs is useful only when everyone knows what it represents.

Hero image: AI-generated illustration, not a Henare Construction project photograph or a survey plan.

A fence is not boundary confirmation

A fence may follow the legal boundary, but don't assume it does. The same caution applies to a hedge or the edge of a driveway. If you measure the building's setback from an unverified fence line, you may be measuring from the wrong place.

That doesn't make fences irrelevant. LINZ's guidance explains that cadastral surveyors consider survey and title records alongside reliable survey marks and evidence of occupation on the ground. They interpret that evidence to determine the correct boundary position. A fence can be part of the evidence; it isn't an automatic answer. [1]

An online boundary map or a phone's GPS display cannot replace that process. Use them for orientation, rather than as the basis for deciding exactly where foundations can go. Legal boundary definition belongs with the appropriate survey expertise. [1] [2]

Know what the pegs mean

Finding a peg is a reason to ask questions, not to stop asking them. Is it a recorded boundary mark? Has its position been checked? Or is it a temporary construction marker showing a building corner or an offset from it?

LINZ specifically cautions that an old peg with no record in an approved cadastral survey dataset has little evidential value beyond information about occupation. Appearance alone doesn't settle the boundary. [1]

Don't move it. If a suspected boundary mark is missing, damaged or doubtful, ask a licensed cadastral surveyor what needs checking or re-establishing. LINZ states that cadastral surveys can only be undertaken by a licensed cadastral surveyor, or someone acting under their direction. [2]

A cadastral surveyor must gather and interpret all the relevant evidence to determine the correct position of a boundary and boundary points.

Toitū Te Whenua Land Information New Zealand, Quality of boundary definition [1]

Boundary surveying and building set-out are different jobs

The boundary question is where your property legally starts and ends. Construction set-out is about transferring the building position and levels from the drawings onto the site so the foundations can be placed correctly.

Those jobs need to connect. Accurate measurements of the house footprint won't fix an uncertain boundary used as the starting point. Equally, knowing the boundary doesn't show that the building corners, orientation and foundation lines have been marked in the right place.

Ask who is handling each task and what information they are using. Where boundary definition is needed, the cadastral licensing requirement applies. That does not mean every construction set-out task is itself a cadastral survey. [2]

For the set-out, ask your builder how the marked position will be checked against the approved site plan and foundation drawings. Be clear about whether a mark represents a wall face, a foundation line or an offset. You shouldn't have to guess what you're looking at.

Use the final drawings, including the levels

Before setting out the foundations, confirm that the team has the final approved plan set, including any approved changes. Compare the site plan with the foundation drawings. The building dimensions and orientation need to agree, and the boundary distances need to refer to the confirmed boundary rather than a convenient fence.

There isn't one setback number to borrow for every property. Ask your designer to identify the requirements applying to your site and explain which part of the building each distance is measured to. Then check the set-out against those requirements and the approved position.

Height needs the same attention as location. Ask how the approved finished floor level will be transferred to the site, what fixed reference is being used, and how the foundation work relates to that level. Knowing where a corner sits horizontally doesn't tell you whether its height is right.

If the proposed position or level needs changing, don't treat an on-site agreement as approval. MBIE says councils need to assess proposed changes to consented work, decide how to approve them, and have the agreed outcome recorded in the approved documentation. Get the right approval before making the change. [3]

Check the position before it becomes permanent

Whangarei District Council's typical foundation inspection descriptions include checking the building's position and orientation. Its guidance also requires consented documents, amendments and relevant paperwork to be available on site. [4]

Read your own consent information for the inspections and supporting evidence required. Ask whether a survey confirmation or building location certificate is needed for your project, who will provide it, and when. Don't assume every build has the same paperwork requirements. The council says those requirements are set out in the consent information. [4]

Before foundation work starts, arrange a set-out discussion with your builder and designer. Have the boundary information and final approved drawings together, ask them to explain the marked footprint and level reference, and record any unanswered questions. If the boundary is uncertain, bring in a licensed cadastral surveyor before relying on it. Resolve the uncertainty while the building position can still be corrected.

Sources
  1. [1] LINZ: Quality of boundary definition and the evidence surveyors consider
  2. [2] LINZ: The survey system and licensed cadastral surveyors
  3. [3] MBIE Building Performance: Making changes to approved building plans
  4. [4] Whangarei District Council: Building inspection requirements and foundation position checks